K.fix

It's about time-saving and repair. Perm and treatment can be done simultaneously in a short time, reducing the burden on customers and enhancing satisfaction.

It's possible through simultaneous treatment of perm and treatment, such as liquid crystal treatment base formulation and strength recovery through cross-linking.

With a 5-minute setting for leaving the first agent, it allows for automatic work in a short time.

It activates the effective ingredients of the perm through heating. It doesn't take effect with natural setting.

We leverage the heat used for perms to simultaneously benefit the treatment, efficiently turning heat into an advantage.

The first agent is formulated to be in liquid crystal form, allowing for simultaneous treatment and reduction, resulting in a shorter processing time and enabling over 90% strength recovery through combined use with processing agents.

With reduced processing time and improved operability, treatments can be completed within 2 hours.

No, it's not. It utilizes glyoxylic acid and maleic acid to balance protein, CMC, and moisture, resulting in less acidity and odor, and also considers preventing color fading.

While it uses glyoxylic acid and maleic acid like typical acid heat treatments, it emphasizes a softer treatment effect by using a milder acidity level.

Approximately once a month. We recommend it after "K.fix perms", cuts, or other treatments to maintain healthy hair.

We recommend experiencing the KAIZEN course every month. Depending on hair length and damage level, you may feel the effects even after just three sessions.

Heating is recommended. While some effects can be achieved without heat, it's best to apply heat for optimal effectiveness.

Elaplex, urea, γ-docosanol, hydrolyzed silk, ceramide-like ingredients, amino care ingredients, macadamia nut oil, jojoba oil.

It strengthens the hair by forming cross-linking bonds, has good compatibility with color treatments, and can be used at any stage.

"K.fix direct" promotes penetration of the first agent or treatment, while "K.fix bridge" protects, repairs, and strengthens damaged areas.

It's a processing agent for promoting penetration with the aquasome and ensuring uniform agent action.

Its main function is to restore strength through cross-linking bonds.

It enhances penetration. With microcapsule technology, it efficiently repairs hair in a short time and reduces uneven agent reactions.

It forms cross-linking bonds to strengthen the hair and improve its health.

Heating is recommended. It uses a formula that exhibits bridging effects through heat.

Both are fine. Both methods effectively perform treatment and cross-linking bonds through heat.

Yes, it can. It efficiently forms cross-linking bonds.

"K.fix direct" alone is not sufficient. "K.fix direct" is a penetration enhancer. Apply "K.fix bridge" on highly damaged areas as well.

It's based on the results of measuring hair tensile strength after treatment. Our tests have shown over 93% strength recovery.

It's not recommended. Please moisten the hair with a sprayer before applying the agents.

It's possible. It can be used as a heated perm. Lower the temperature to below 60°C, and keep it for about 5 minutes.

Heating the first agent is possible since it's a formulation based on the assumption of heating, but do not heat after application.

The benefit is that it allows simultaneous treatment and reduction by liquidizing it, providing a good touch when rinsing, and improving operability afterward.

The ratio of protein, oil (CMC), and moisture liquidized into a treatment agent.

You can use them. Adjust the iron temperature lower according to the level of damage.

It's possible due to the action of "K.fix direct" (penetration enhancer) and the liquid crystal emulsification formulation of the first agent.

It's achievable with proper selection of agents.

The first agent contains dithiodiglycolic acid, which has a buffering effect, so it works regardless of the damage level.

The application time is assumed to be within 10 minutes. While standard application methods are sufficient, the formula's good spreadability allows for quick application with combing, etc.

While there's minimal risk due to the inclusion of dithiodiglycolic acid, please strictly adhere to the precautions for use as a quasi-drug.

Using "K.fix direct" allows for a 5-minute processing time.

It becomes clearer by wrapping a test rod after applying the agents.

It refers to very fine emulsified particles (liquid crystals). By balancing proteins, CMC (oil), and moisture, it improves the spread and penetration of the agents.

DLv.0～1：K.fix black,DLv.2：K.fix red,DLv.3：K.fix yellow,DLv.4：K.fix white Those are references.

Refer to the damage level table below:

Diagnose damage levels by area and apply separately. "K.fix platinum" treatment can reduce damage when applied to specific areas.

Diagnose damage levels by area and apply separately. Leave each for 5 minutes.

It depends on the degree of damage. It's fine at around DLv.4.

It improves texture but isn't a treatment. Be cautious as it contains cysteamine for reduction

No, it cannot. Use it when you want to apply it thoroughly or improve texture.

Yes, it can. However, rinse it off if it doesn't agree with your skin.

Yes, it's fine. Follow up with thorough application of "K.fix bridge" and "K.fix platinum".

Apply "K.fix direct", then "K.fix bridge" to damaged areas, then "K.fix platinum" if reduction is needed, then Agent 1.

Hair straightening: below 180°C, Soft straightening: around 70–150°C, adjust according to hair texture.

Please leave it on for 3 minutes or more. You can leave it on for up to 10 minutes.

It's formulated so that it doesn't become an overtime treatment for up to 10 minutes, despite containing hydrogen peroxide as the main ingredient.

Gamma-dodecalactone, Elaplex, Fullerene, Chitosan, for thermal repair, strength recovery, antioxidant effects, and film formation.

For medium permed hair, about the size of a 500 yen coin. Adjust the amount according to length, hair volume, and damage level.

Rub it in before finishing, and it's effective to apply heat with a hairdryer.

It improves manageability but doesn't provide hold. It repairs damage and forms a film on the hair surface to maintain the style.

It's urea, which softens hardened proteins.

It acts on cysteine residues to form cross-links. It's reported to be compatible with color and causes minimal fading.

Level 0 is completely undamaged water-repellent hair, while Level 1 is hair subjected to external stimuli or minimal chemical treatments, with levels 2–5 indicating increasing complexity of chemical treatment overlap and progression of damage.

Refer to the specifications table below.

	Quasi-Drug					Cosmetics
	K.fix yellow	K.fix red	K.fix black	K.fix second liquid	K.fix second emulsion	K.fix white	K.fix platinum	K.fix direct	K.fix bridge	K.fix keeper
	Hot Perm Normal	Hot Perm Hard	Hair Straightening	K.fix yellow, K.fix red: Corresponds to Agent 1	K.fix black: Corresponds to Agent 1	Cosmetic Soft Curl Soft Straightening	Treatment	Penetration Enhancer	Cross-Linking Agent	After bath Treatment
Contents	400ｇ	400ｇ	400ｇ	400ml	400g	400g	400g	800ml	800ml	100g
Active Ingredient	Thio Glycolic Acid 4.0	Thio Glycolic Acid 4.8	Thio Glycolic Acid 9.8	Hydrogen Peroxide Water 1.5	Hydrogen Peroxide Water 1.5	Cysteamine 3.9
Dithiodiglycolic Acid	0.8	0.7	2.9
Al	3	3.5	6.5			0
pH	8.9	9	9.1	3.0	3.5	7	5	8	4	4.5
Power Level	3	4	5			2
Hair Types	Fine to Normal Hair	Normal to Coarse Hair	Normal to Coarse Hair			Fine Hair
Damage Level	Lv.1～4	Lv.0～3	Lv.0～3			Lv.2～4

We recommend performing the treatment on wet hair. Moisture helps the penetration of the reducing agent. Ideally, the hair should be towel-dried after shampooing.

For healthy hair, use "K.fix direct". For damaged hair, use "K.fix bridge".

It's easier to calculate, and since both the agent and "K.fix GMT" are not diluted, you can expect the penetration and treatment effects of "K.fix" directly.

By formulating "K.fix GMT" in its original concentration without dilution and incorporating liquid crystal emulsification into the base, a reaction time of 5 minutes is achievable.

While there may be exceptions depending on hair texture and condition, the treatment can generally be done in 5 minutes.

After applying Agent 1, wrap fine rods, aiming for a diameter 1.5 to 2.0 times the rod size, for the check. Due to the high penetration power of the liquid crystal emulsification formula, a check can be done in 5 minutes.

For hair straightening: 160°C–180°C for quick ironing through (140°C–160°C for damaged areas). For hot perms: 70°C–80°C for about 7 minutes.

"K.fix platinum" treatment has unique properties and penetration power that other products do not have. ※We have not conducted verification with other brand products, so please do not mix.

It acts on S-2.

With the popularity of high tones and increasing complexity of damage, we have made it possible to propose acidic treatments with the "K.fix" series, which were previously challenging to recommend.